DigiTech HARDWIRE SP-7 Bedienungshandbuch PDF herunterladen (Seite 16)

Tap Tempo

The SP-7 Phaser’s Foot Switch can be used as a Tap Tempo switch for setting the

phaser effect’s modulation speed time during a live performance. To access Tap

Tempo, do the following:

1. Press and hold the Pedal Switch for 3 seconds. The effect first will turn

on and the Indicator LED lights solid BLUE (NOTE: If the effect was

already on, it will first turn off and then back on after 3 seconds).

2. After 3 seconds of holding the Foot Switch, the Indicator LED will

begin flashing BLUE indicating Tap Tempo mode is now active and the

LED flashes at the current modulation Speed.

3. Tap the Foot Switch at least two times to set a new modulation speed.

The last two pedal tap intervals set the modulation speed.

After 4 seconds, the tap tempo function times out and you will need to

tap 2 times again to set the tempo.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Keine Kommentare

DigiTech HARDWIRE SP-7 Bedienungshandbuch Seite 16