Learn-A-Lick Mode
The Learn-A-Lick function allows you to record a 10 second passage of music and play it back as slow as 1/4 speed
with no change in pitch. This is very useful for picking out the notes of a fast solo passage.
There are 6 functions for Learn-A-Lick.They are:
• Stop (Controlled by the number 1 Footswitch) • Rewind (Controlled by the number 2 Footswitch)
• Play (Controlled by the number 3 Footswitch) • Record (Controlled by the number 4 Footswitch)
• Tempo Down (Controlled with Control Footswitch) • Tempo Up (Controlled by the Bank Footswitch)
Using Learn-A-Lick
1. Connect the output of your CD or tape player headphone output to the Jam-A-Long input jack on the rear panel
using an 1/8” stereo plug. Set the level of the CD/tape player to a desired listening level.
2. Cue up to the passage you want to record and hit pause on the CD or tape player.
3. Press and hold the Bank and Control switches to enter Learn-A-Lick mode.The display will read: LaLick.
4. Release the pause button on your playback device and press the number 4 (Record) Footswitch when you are
ready to begin recording the passage. The display will read: rEC and recording will begin. The red Display will
provide a time elapsed reference while recording.When recording is completed, the phrase will be set to an auto-
loop playback mode indicated by play in the Display. Press stop or pause on the CD or Tape player.
5. Press the Control (Tempo Down) Footswitch to slow the playback down to 1/4 speed in 1/8th speed intervals.
Press the Bank (Tempo Up) Footswitch to increase the playback speed to normal at 1/8 speed
intervals.Your interval choices include: Full, 7/8, 3/4, 5/8, 1/2, 3/8, and 1/4 speeds.
6. Pressing the number 2 (Rewind) Footswitch steps back through the loop at 1 second intervals.
7. The Expression Pedal will control output level of the recorded phrase.
8. To stop the playback, press the number 1 (Stop) Footswitch.
9. To record a new passage, press the number 4 (Record) Footswitch again.
10. To exit the Learn-A-Lick mode, press and hold the Control and Bank switches, or press the Exit button.
Jam-A-Long
The Jam-A-Long feature allows you to connect a Tape or CD to the RP2000, and Jam with your favorite artists.The sig-
nal from your tape or CD player is output through the left and right, and headphone outputs of the RP2000. To use
the Jam-A-Long feature, connect the headphone output of your tape or CD player to the Jam-A-Long input on the rear
panel of the RP2000 using an 1/8” stereo cable, and press play on your tape or CD player.
Page 10
Section One - Introduction
RP2000 User’s Guide
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern